|
|
Services
|
Partition Separation Sources: - Ontario New Home Warranty Program Partition separation is cracking that develops between interior partition walls and ceilings or floors, usually characterized by gaps opening in winter and closing in summer. Partition separation can be caused by:
As pre-fab trusses dry, they shrink. Since the bottom chord is surrounded by attic insulation, it's warmer and dryer, and might shrink more than the other chords. The top chords can actually lengthen if they absorb moisture. Differential shrinkage between top and bottom truss members causes the entire truss to bow upwards, a phenomenon known as "truss arching" or "truss uplift". If the drywall is attached to the bottom chord too close to a partition, this movement will crack the drywall and/or the joints. If the truss is secured tightly to the partition, it lifts the entire wall, and separation appears at the floor level. Available data suggests truss movement occurs only in approx. 20% of reported cases of partition separation. Cracks at ceiling-wall and floor-wall joints open in winter and close in summer, primarily during the first year when most of the drying takes place. The best cure is an ounce of prevention. New techiques for framing, drywalling and insulating (and a co-operative effort between these trades) can virtually eliminate the problem. Using dry lumber (max 19% moisture content) helps, and proper handling and storage techniques are also important. If you have an existing truss-uplift problem, try removing the ceiling drywall screws within 16 inches of the walls, and apply a broad cove moulding. The moulding should be attached only to the ceiling, so that it can slide up and down the wall with temperature changes. Partition Separation: Prevention and Solutions More info from the Wood Truss Council of America See also: Truss Uplift - Cracked tape joints
|
|
All
Around The
House™
